Are you performing one RGH ? then this kit will save you £££'s.
You will get one deluxe SPI NAND flasher and you can choose whether to have an ACE V3+ (Corona only) or ACE V5 (Corona & Trinity) chip to use. The SPI NAND flasher does not have the ability to program chips unless you perform a mod on it, this is not a problem though, the ACE chips supplied come pre-programmed for use with Trinity and Corona boards, You will get boot times from instant to up to 30 seconds. For a Corona we highly recommend the ACE V3+, leave the wires at the default length and you will enjoy extremely fast boot times
The NAND wires supplied with the SPI NAND flasher are a far superior quality than the wires supplied with the JR Programmer and NAND X and are hand made.
WHEN USING THIS PROGRAMMER WITH THE J-RUNNER SOFTWARE (PLEASE USE THE SOFTWARE AVAILABLE FROM HERE TO DOWNLOAD AFTER PURCHASE), IT USES THE NAND X DRIVERS AND IT WILL REPORT THAT IT HAS FAILED TO WRITE TO EVERY BLOCK WHEN YOU WRITE TO THE NAND, THIS IS FALSE AND IT WILL HAVE WRITTEN PERFECTLY, JUST IGNORE IT AND LET IT CARRY ON WITH THE PROCESS. ALSO MAKE SURE THAT YOU HAVE THE 'MTX MODE' CHECKED IN JRUNNER AND KEEP A SEPERATE BACK UP OF YOUR NANDS OUTSIDE OF JRUNNER.
PLEASE NOTE: If you are doing a corona board you need to make sure you have a 16mb NAND, if you have a 4GB NAND this programmer is no good to you, you will need to purchase the SD Tool or the 4GB nand RW Tool, also you have to find out if you need a postfix adaptor, if you do then this can be added for £3.99.
1 X Deluxe SPI NAND flasher.
1 X ACE V3+ or ACE V5.
optional postfix v2 adaptor.
All in one RGH kit
- Product Code: AIO Kit
- Availability: 83